How to Make Resin Painted Fridge Magnets: A Step-by-Step Guide

Materials Needed

• Epoxy resin (two-part, clear)

• Hardener (comes with the resin kit)

• Silicone molds (small shapes like flowers, leaves, or geometric designs)

• Acrylic paints or resin pigments

• Small mixing cups and stir sticks

• Toothpicks or fine brushes (for detailing)

• Magnets (small neodymium or adhesive-backed)

• Glue (strong adhesive like E6000 or super glue)

• Sandpaper (fine grit, optional for smoothing edges)

• Disposable gloves and protective mask (for safety)

• Isopropyl alcohol (for cleaning bubbles)

Step-by-Step Instructions

1. Prepare the Workspace

• Work in a well-ventilated area and cover your table with a silicone mat or parchment paper.

• Wear gloves and a mask to avoid inhaling resin fumes.

2. Mix the Resin

• Follow the resin manufacturer’s instructions for the correct resin-to-hardener ratio.

• Stir slowly for 2-3 minutes to avoid creating too many air bubbles.

3. Add Color (Optional)

• Mix a small amount of acrylic paint or resin dye into the resin for a solid-colored base.

• For a marbled effect, pour clear resin into the mold first, then add drops of colored resin and swirl with a toothpick.

4. Pour Resin into Molds

• Fill the silicone molds about halfway (for layered designs) or completely (for solid colors).

• Use a toothpick to pop any surface bubbles, or lightly spritz with isopropyl alcohol.

5. Let the Resin Cure

• Cover the molds with a lid or box to prevent dust from settling.

• Allow the resin to harden for 24-48 hours (check manufacturer’s guidelines).

6. Demold and Sand (If Needed)

• Gently remove the cured resin pieces from the molds.

• If edges are rough, lightly sand them with fine-grit sandpaper.

7. Paint Details (Optional)

• Use acrylic paint and a fine brush to add hand-painted designs.

• Let the paint dry completely before sealing (if needed).

8. Attach Magnets

• Apply a strong adhesive (like E6000) to the back of each resin piece.

• Press a small magnet onto the glue and let it dry for a few hours.

9. Final Cure & Enjoy!

• Allow the magnets to fully set before using them.

• Stick them on your fridge, whiteboard, or give them as gifts!

Tips for Best Results

✔ Work quickly—resin starts hardening within 20-30 minutes.
✔ Use UV resin for faster curing (under a UV lamp).
✔ Experiment with glitter, dried flowers, or metallic leaf for extra texture.
✔ Store unused resin properly to prevent premature curing.

With these steps, you can create beautiful, custom resin fridge magnets in any shape or color. Happy crafting!

Would you like additional design ideas or troubleshooting tips? Let me know! ?